200mm Electric Scaling Machine — Portable Surface Preparation Solution

Model: 11500-0-200M | Code Range: 591964 / 591965 / 591966 | Scaling Width: 200mm

The 200mm Electric Scaling Machine is a compact yet powerful walk-behind surface preparation tool engineered for ship decks, factory floors, and large steel plate structures. Unlike bulkier industrial equipment, this 200mm-width unit offers superior maneuverability in confined marine and industrial environments while delivering professional-grade rust, paint, and oxide removal performance.

Manufactured by NINGBO YINXUN MECHANICAL & CHEMICAL CO., LTD., this machine is designed for operators who demand reliable surface profiling results with minimal downtime and flexible power compatibility.

Why Choose the 200mm Electric Scaling Machine?

• Multi-Voltage Compatibility: Available in AC 110V single-phase, AC 220V single-phase, and AC 220V three-phase configurations to match global power standards.
• Interchangeable Work Assemblies: Quickly swap between beam cutters, star cutters, tungsten carbide drums, chain drums, and steel wire brushes to handle everything from heavy rust to fine surface polishing.
• Precision Depth Control: Rust removal depth adjustable from 0–3mm via ergonomic height adjustment handle. Fine-tune assembly height for uniform finish without substrate damage.
• Compact & Mobile: Overall dimensions 355 × 1200 × H950 mm; weight 43 kg. Small-caster design allows easy transport through narrow ship corridors and workshop aisles.
• High-Power Motor: 2.2 kW / 3 HP motor with 1700 rpm drum speed ensures efficient large-area completion with reduced labor costs.
• Factory-Tested & Preset: Each unit is powered on and tested before shipment. Motor voltage and electrical settings are preset at factory—ready to work upon delivery.
• CE Certified: Compliant with European safety standards for professional industrial equipment.

Technical Specifications — 200mm Series

*Note: 440V three-phase variant (591966-440V3P) available for specific industrial power grids. Contact us for voltage verification before ordering.

Standard Factory Configuration

Each machine is shipped with the following standard setup:

• Standard Installed Assembly: Beam Cutters Assembly 200mm — Ideal for general-purpose rust and paint removal on flat steel surfaces.
• 50m marine-grade power cable with waterproof plug and socket
• Height adjustment handle and gear assembly
• Belt guard and motor pulley system
• Operation manual (English)

Interchangeable 200mm Work Assemblies & Accessories

The real versatility of this machine lies in its modular accessory system. Depending on your specific surface preparation task—whether removing heavy marine corrosion, stripping old paint, roughening cement, or polishing steel—you can select the optimal 200mm assembly.

Complete 200mm Assembly Options

How to Select the Right Assembly

• Heavy Rust / Thick Oxide: Use Star Cutters (591971) or Tungsten Carbide Drum (591973) for maximum cutting action.
• Paint & Coating Removal: Tungsten Carbide Drum (591973) offers the best balance of removal speed and drum longevity.
• General Maintenance / Mixed Surfaces: Chain Drum with Crop Ends (591975) provides flexibility across variable surface conditions.
• Surface Roughening / Re-painting Prep: Steel Twisted Wire Brush (591977) creates ideal anchor patterns for new coatings.
• Final Cleaning / Light Polish: Steel Simple Wire Brush (591979) for smooth, cleaned surfaces before inspection or light coating.

Replacement Spare Parts — 200mm Series

All 200mm assemblies and spare parts are in stock and available for immediate shipment. Contact our sales team for bulk accessory pricing.

Recommended Applications

• Marine & Shipyard: Ship deck rust removal, hold cleaning, superstructure surface preparation before anti-corrosive painting.
• Industrial Maintenance: Factory floor steel plate maintenance, weld seam cleaning, old coating removal from machinery bases.
• Infrastructure: Bridge steel girder surface profiling, storage tank exterior preparation, offshore platform maintenance.
• Construction: Cement floor roughening before overlay application; improving mortar bond strength on existing slabs.

Operation & Maintenance Highlights

Quick Start Guide

<

1. Verify motor nameplate voltage matches your power supply (110V / 220V single-phase or 220V three-phase).
2. Adjust the height handle to the top gear position before starting—this lifts the assembly clear of the surface.
3. Power on the machine, then gradually lower the handle until the assembly contacts the work surface.
4. Maintain a forward speed of approximately 5–7 meters per minute for optimal results.
5. For thick rust layers, make repeated overlapping passes to achieve uniform surface finish.

Maintenance Tips

• Check belt tension after the first 8 hours of operation, then every 20 hours. Belt deflection under finger pressure should be less than 5mm.
• Lubricate rolling bearings in the assembly regularly with professional bearing grease.
• Clean dust and residue after each use. Do not use a pressure washer on the machine body.
• Inspect cables, motor wiring, and grounding conditions frequently. Replace damaged cables immediately.
• When replacing assemblies, adjust the fork hinge position to match the specific assembly size for correct working height.

Safety & Compliance

• CE Certified — meets EU machinery safety directives.
• Always wear protective goggles, ear defenders, dust masks, gloves, and protective caps during operation.
• Ensure adequate workplace ventilation—machine generates dust and debris during scaling.
• Disconnect power before any assembly replacement, maintenance, or cleaning.
• Do not operate in rain or high-humidity environments. Keep cables away from liquids and sharp edges.
• Never remove the belt guard during operation.

Frequently Asked Questions

What is the difference between the 200mm and 300mm models?

The 200mm series (591964–591966) is lighter (43 kg net) and more maneuverable in tight spaces such as ship corridors and small workshops. The 300mm series covers larger areas faster but requires more open space. Both share the same motor power and accessory interchangeability logic.

Can I use 300mm assemblies on the 200mm machine?

No. The fork hinge position, drum shaft length, and machine frame geometry are calibrated per scaling width. Always use 200mm-rated assemblies (codes 591971–591979) with the 200mm machine.

Which voltage should I choose for my ship or workshop?

For North American vessels and facilities: choose 591964 (110V single-phase). For European/Asian single-phase grids: choose 591965 (220V single-phase). For industrial three-phase power (most shipyards and factories): choose 591966 (220V three-phase) for maximum motor efficiency and torque stability.

Is the Beam Cutters Assembly the only option included?

Yes, the standard factory configuration includes the Beam Cutters Assembly 200mm pre-installed. All other assemblies (star cutters, wire brushes, tungsten drums, chain drums) are available as add-on purchases. We recommend ordering multiple assemblies if your project involves varied surface conditions.

How do I order replacement parts?

All spare parts listed above are maintained in stock. Provide the Code (e.g., 591989 for Star Cutter) when contacting our parts department for fast quotation and dispatch.

Request a Quote

Ready to equip your maintenance team with a reliable 200mm electric scaling machine? Contact NINGBO YINXUN for competitive factory-direct pricing, voltage confirmation, and accessory package recommendations tailored to your surface preparation needs.

Email: admin@all-kmarine.com.cn
Web: www.ningboyinxun.com

*Specifications are based on laboratory testing. Actual performance may vary depending on operating environment, surface condition, and assembly type selected.